Primepoxy

Classification .

Two-component liquid epoxy resin

Packaging

7.5 kg kit (component A – 5 kg + component B – 2.5 kg)
37.5 kg kit (component A – 25 kg + component B – 12.5 kg)

Color

Transparent

Description


Epoxy resin, due to its main qualities of adhesiveness, resistance to loads and chemical resistance, has a variety of applications.

Elevada resistência

EN 998-1:2016

Properties


Adhesion to a wide variety of surfaces, excellent chemical resistance, excellent mechanical resistance, low level of curing shrinkage, easy to apply, easy to maintain and clean. The addition of fillers (e.g. silica) and pigments allows the preparation of specific mortars with wide application in industry and decoration.


Composition


Two-component liquid epoxy resin sold in pre-dosed quantities: epoxy resin (component A) and curing agent (component B).


Support


Cementitious screeds.

Suitable for various applications: bridging between concrete slabs; Flooring: self-leveling, decorative, thin layer, non-slip, sanitary, industrial; Surface sealants; Crack repair; Anchors.


Application instructions


Primepoxy is a two-component product that is mixed at the time of application. The mixture is made by adding component B (curing agent) to component A (resin) and mixing by hand or with a slow stirrer. It is recommended that the container be mixed completely to avoid partial dosage errors. Primepoxy can be applied by brush, spread with a spatula, applied with a roller in the case of sealing, for example, and injected or poured in the case of cracks, for example. Whenever there are relatively large spaces to be regularized (wide cracks, concrete restoration), silica sand can be mixed with the resin. It is recommended to pay attention to the workability time of the resin, application should be quick.

Safety data sheet Technical sheet

Technical Data

Application:

Indoor/Outdoor

Application Temperature :

10ºC to 30ºC.

Color:

Transparent

Usage time of fresh resin :

≈ 10 minutes (20º C)

Drying time :

12 hours

Commissioning time :

12 hours

Mixing Ratio :

(Resin / Hardener) = 2:1

Consumption:

as an example: primer + epoxy paint + sealing = 0.8 kg/m2 ( total thickness = 200 µm)

Cleaning tools :

organic solvent (Toluene / Xylene) / Isopropyl Alcohol, immediately after use.

Packaging:

7.5 kg kit (component A – 5 kg + component B – 2.5 kg) 37.5 kg kit (component A – 25 kg + component B – 12.5 kg)

Storage:

1 year in original, closed packaging, protected from humidity and heat/cold.

Component A (Epoxy Resin) :

Bisphenol-A-

100% solids

Viscosity at 25°C (DIN 53 015) :

500 – 900 mPa∙s

Equivalent weight (DIN 16 945) :

180 – 200 g

Density at 20° C (DIN 53 217 T.4) :

ca 1.13 g/cm3

Volatile Organic Compound (VOC) :

0 g/L (according to the supplier's technical data sheet)

Component B (Hardener) :

Modified aliphatic cyclopolyamine

Viscosity at 25°C (DIN 53 015) :

70 – 120 mPa∙s

Amine equivalent weight :

93 g

Amine Number (DIN 16 945) :

250 – 350 mg KOH/g

Density at 20° C (DIN 53 217 T.4) :

1.02 ± 0.02 g/cm3

Color Number (Gardner) (DIN ISO 4630) :

< 1

Volatile Organic Compound (VOC) :

360 g/L (according to the supplier's technical data sheet)

CE Marking Data

Not applicable

Receive additional information