Prime flow 10
Classification Type CT C40 F10 A22
Industrial self-leveling for interiors.
Packaging
25 kg bags
Pallet of 56 x 25 kg bags (1400 kg)
Color
Gray
Description
Industrial self-levelling mortar for interiors, Type CT C30 F8, with high performance. Suitable for levelling floors with a thickness of 5 to 20 mm, such as: garages, industrial areas and for finishing and levelling floors, before laying the final covering.
Indoor application
Properties
Premature resistance, with normal pedestrian movement possible after 6 hours and more intense pedestrian movement possible after 12 hours. When mixed with water, the product acquires excellent fluidity. It can be applied with a mixing/pumping machine.
Composition
Special cements/binders, resins, mineral fillers and specific additives.
Support
Plaster and cement screeds properly smoothed and consolidated.
IApplication instructions
Product for exclusive use by Professionals
• Mix 5.25 litres of clean water for each 25 kg bag of
powder with a slow electric mixer (500 rpm). The mixture should be fluid, homogeneous and free of lumps;
• Leave to stand for 2 minutes and mix again;
• Spread the paste over the surface;
• Make a first pass, pressing the product against the support, to fill the holes;
• Apply the fluid paste all at once and help it spread with a metal spatula (which can be
notched) or a roller;
• The self-levelling agent can be applied continuously;
• It is recommended to use a spiked roller during application;
• After 24 hours (first check the hardness of the self-levelling agent), on large surfaces, make
a longitudinal and transversal cut, between 5 and 8 m, or by cutting through the existing cut in the support.
You can also use spacers for this purpose with stress-absorbing properties;
• To apply a final coat of paint, for example epoxy or polyurethane, it is essential
to check that there is no moisture on the floor, regardless of the drying time.
Technical Data
|
Product presentation : |
Dry powder |
|---|---|
|
Granulometry: |
≤ 0,5 mm |
|
Apparent specific weight of powder: |
1,50 Kg/dm3 |
|
Application: |
Indoor |
|
Operating temperature: |
5oC a 30oC |
|
Flammability: |
Non-flammable |
|
Amount of water for mixing: |
5.25 L of water per 25 kg of powder |
|
Application thickness: |
5 mm to 20 mm |
|
pH: |
13 |
|
Colour: |
grey |
|
Resting time after mixing: |
2 min |
|
Time of use of mortar: |
30 min to 20oC |
|
Hardening time: |
75 min to 20oC |
|
Time for occasional pedestrian circulation: |
4 horas to 20oC |
|
Minimum time for commissioning: |
24 hours |
|
Time to apply the final coating : |
72 hours minimum |
|
Density of fresh mortar: |
2,0 Kg/dm3 |
|
Yield: |
16.5 kg of powder/(m2 x 10mm thickness) |
|
Adhesion 24 hours |
≥ 1,0MPa |
|
Adhesion 7 days |
≥ 1,6MPa |
|
Adhesion 28 days |
≥ 1,8MPa |
|
Flexural strength 24H |
≥ 5 MPa |
|
Flexural strength 7 days: |
≥ 8 MPa |
|
Flexural strength 28 days: |
≥ 10 MPa |
|
Compressive strength 24H: |
≥ 15 MPa |
|
Compressive strength 7 days: |
≥ 25 MPa |
|
Compressive strength 28 days: |
≥ 30 MPa |
|
Cleaning: |
Use water |
|
Packaging: |
25 kg bags | 1400 kg pallet (56 bags) |
|
Storage: |
1 year in original, closed packaging and protected from humidity. |
CE Marking Data
|
Reaction to fire: |
Class F |
|---|---|
|
Compressive Strength (28d): |
Class C30 |
|
Flexural strength (28d): |
Class F8 |
|
Shrinkage (28 days) |
≤ 0,6 mm/m |
|
Durability: |
Validated by declared performance classes |
Receive additional information